Waste bin Making Machines Z/3200
Basic Info
Model No.: Z/3200
Product Description
AOTAI Series Injection Molding Machine specifically used in Thin-Wall Plastic Product like:Food Container, Cell Case, Medical Products, Electronic Parts etc.
Z Series main features:
1.According to product demand , easy to customize opening stroke
2.Mold opening & clamoing with agility and stability , which has impoved cycle time
3.Increase the service life and reduce maintenance cost
4.With strong stiffness of frame platen , which can reduce the floor area
Z series technical parameters
INTERNATIONAL CLASS NO.
| | 3200/62000 | ||
SPECIFICATION | | Z/3200 | ||
Screw type | | A | B | C |
Injection Unit | ||||
Screw diameter | mm | 200 | 220 | 240 |
Screw L/D ratio | L/D | 21 | 21 | 21 |
Shot volume (theoretical) | CM³ | 37699 | 45616 | 54287 |
Injection weight (PS) | g | 34306 | 41511 | 49401 |
Injection rate | g/s | 1857 | 2247 | 2674 |
Injection pressure | Mpa | 163 | 135 | 113 |
Screw speed | rpm | 50 | ||
Clamping Unit | ||||
Clamping force | KN | 3200 | ||
Space between tie-bars | mm | 2160*1900 | ||
Max .mould height | mm | 2000 | ||
Min . mould height | mm | 1000 | ||
Ejector stroke | mm | 550 | ||
Ejector force | KN | 565 | ||
Max daylight | mm | 4200 | ||
Mould opening stroke | mm | 3200/2200 | ||
Max.mold weight | t | 75 | ||
Other | ||||
Pump max . pressure | Mpa | 21 | ||
Pump motor power (servo) | KW | 55+55+55+55+7.5 | ||
Heating power | KW | 210 | ||
Numbers of heating area | Segment | 10+1 | ||
Machine dimension (L*W*H) | M | 17.7*5*5.3 | ||
Oiltank cubage | L | 3600 | ||
Machine weight | TON | 195 |
ALLWAY , Always on the way!
Product Categories : Injection Molding Machine > Z Series Two Platen Machine